Product Details:
Payment & Shipping Terms:
|
| Product Name: | Dioctyl Phthalate | Odor: | Odorless Or Slight Odour |
|---|---|---|---|
| Density20, G/cm³: | 0.983-0.985 | Appearance: | Colorless Liquid |
| Type: | Plasticizer | Usage: | Leather Auxiliary Agents, Rubber Auxiliary Agents |
| High Light: | dop plasticizer,dop oil |
||
High Performance Plastic Auxiliary Agents Odorless Safe Use Slightly Soluble
Description
Dioctyl phthalate DOP 99.5% is an important general type primary plasticizer mainly used in the processing of PVC resins,and can be used in the processing of chemical fiber resinsacetic acid resinsABS resinsrubber, also used in producting paintdyedispersant etc.
Appearance: Colorless oily liquid, specific weight 0.9861 (20/20), -55 melting point, boiling point 370 (pressure), does not dissolve in water, soluble in ethanol, ether, mineral oil, most of the organic solvents
Specification
| Item | Index | |||
| General Grade | Electric Grade | Food Grade | Medical Grade | |
| Appearance | Transparency liquid, No suspended substance | |||
| Odor | Odorless or slight odour | Odorless | ||
| Purity≥% | 99.5 | 99.5 | 99.5 | 99.5 |
| Density20, g/cm³ | 0.983-0.985 | |||
| Acidity (mgKON/g)≤ | 0.07 | 0.05 | 0.05 | 0.02 |
| Water content,%≤ | 0.1 | |||
|
Chroma, (Platinum-cobalt ) |
40 | 40 | 20 | 20 |
| Refractive index20% | 1.486-1.487 | |||
| Viscosity20mPa.s | 77-82 | |||
| Volume resistivity,*10.9m | ----- | ≥1.5 | ----- | ----- |
| UV absorption value220-230nm | --------------------- | 0.2 | ||
Characteristics
1) High plasticizing efficiency and fusion rate
2) Good low volatility, Uv-resisting, cold-resisting property
3) Excellent softness
Stroage
Emergency overview - Avoid contact with skin, eyes and clothing - Avoid breathing vapor or mist - Washing thoroughly after handling - Use only with suitably ventilation - Avoid contact with strong oxidizers, excessive heat, sparks or open flame.
Hazardous decomposition products - Thermal decomposition may release toxic and hazardous gases Fire and explosion hazard - Slightly fire hazard when exposed to heat or flame and larger fires use water spray fog or regular foam.
Stability and reactivity - Stable under normal temperature and pressure.
Quality standard
The product meets GB/T 5761-2006 standard with its physical and chemical properties meeting requirement in table below:
1. The user can choose any one from vifscosity number, K value ,index of average polymerizapion degree.
2. The user can confer with the manufacture if they have other index ,requirement ,on thermal stability.
Contact Person: zach zhang
Tel: +86-15306929506
